Panasonic AG-UMR20P, Руководство по эксплуатации

Страница: 76 / 260

- 76 -
Using the SHIFT button
Useful recording and shooting functions can be used by pressing designated buttons while pressing and holding the
SHIFT button.
≥ Operation is not possible when the menu screen is displayed, except for the operation of turning on/off the LCD
monitor.
Perform the operation after closing the menu screen.
The operation buttons can be disabled temporarily to prevent accidental operation.
Press and hold the SET button for 2 seconds or longer while pressing and holding the SHIFT
button.
≥
All the button operations become disabled.
≥ This is canceled by pressing and holding again for 2 seconds or longer.
≥
The lock setup is canceled when the unit is turned off.
≥ (yellow) is displayed in the LCD monitor while the operations are locked.
≥
The following operations are enabled even while the operations are locked.
j Recording and zoom operation with the wired remote control (optional) connected to the CAM REMOTE terminal.
j
Operation from the Web screen of the remote camera controller, PC, or mobile terminal connected via network.
Recording
Useful functions
Buttons pressed at the same
time as the SHIFT button
Function
Usable modes
CAM Mode SDI Mode
AUDIO MON/ADV
j
button Reduces the input level of audio (
l
61 )
± ±
AUDIO MON/ADV
i
button Increases the input level of audio ( l 61 )
± ±
SET button (press and hold) Lock the button operations or cancel the setting ± ±
Display the focus assist (
l
51 )
± s
Display the wave form (
l
77 )
± ±
Using the PUSH AUTO function ( l 50 )
± s
(short press) Perform Auto White Balance ( l 53 ) ± s
(press and hold)
Perform both the Auto Black Balance/Auto
White Balance (
l 53 )
± s
USER1 button Switching on/off of the LCD monitor ± ±
Lock or clear button operations
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 76 ページ ２０１７年５月２２日 月曜日 午後２時１１分