Panasonic AG-UMR20P, Руководство по эксплуатации

Страница: 69 / 260

- 69 -
≥
Register <FRZ FRAME> to a USER button. ( l 65 )
Freezes the image on the unit.
≥
will appear on the screen and flash.
≥ If you record a motion picture during Freeze Frame, the frozen image and sounds will be recorded.
≥
This function is not available in the following cases:
j When using Focus Assist ( l 51 )
j
When color bars are displayed ( l 73 )
≥ Freeze Frame is canceled if you operate this unit in any of the following ways:
j
Turning off the unit
j Pressing the MODE button
j
Changing the [PRIORITY MODE] or [REC FORMAT] setting
≥
Register <IR REC> to a USER button. (
l
65 )
This changes the Infrared Recording Mode setting.
≥
This unit operates as follows in Infrared Recording Mode:
j appears on the screen.
j
The iris will be forced to OPEN and the upper limit value for shutter speed will be limited.
≥ It is recommended to use a tripod.
≥
It takes longer to focus with Auto Focus in dark locations.
≥ Do not use this function in a bright location. Doing so may cause malfunction.
≥
You can record a clear image by positioning the center area of the screen over the subject.
≥ Focus values may not be displayed correctly in Infrared Recording Mode. ( l 48 )
≥
The following menu items are not available in Infrared Recording Mode:
j
[SKIN TONE DTL] ( l 202 )
j [WB R GAIN] ( l 202 )
j
[WB B GAIN] ( l 202 )
j [CHROMA LEVEL] ( l 203 )
j
[CHROMA PHASE] ( l 203 )
j [MATRIX] ( l 203 )
j
[COLOR CORRECTION SETTING] ( l 204 )
j [BACKLIGHT COMPENS.] ( l 55 , 207 )
j
[SPOTLIGHT COMPENS.] ( l 55 , 207 )
j [VAR] ( l 209 )
j
[SCENE FILE] ( l 70 , 220 )
≥
The following functions are not available in Infrared Recording Mode:
j
Change the White Balance mode (
l
52 )
j Iris adjustment ( l 54 )
j
Synchro Scan (
l
59 )
j
ND filter (
l
80 )
j ATW Lock ( l 53 )
j
Super Gain (
l
57 )
≥ It is also possible to change the color in which images are recorded in [IR REC COLOR] ( l 210 )
≥
If [FOCUS] is set to [MANUAL], depending on the recording conditions, the subject may go out of focus when you
switch to Infrared Recording Mode. Adjust the focus as needed or set [FOCUS] to [AUTO].
≥
Night-time recording requires a commercially-available IR LED illuminator. We recommend using an IR LED
illuminator with a wavelength of approximately 850 nm.
<FRZ FRAME>
<IR REC>
Freeze
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 69 ページ ２０１７年５月２２日 月曜日 午後２時１１分