Panasonic AG-RCP30P Скачать руководство пользователя страница 56

Страница: 56 / 64

No.

Message

Measure

E20801 The recorder reboots by

unrecoverable card ejection

error.

Be sure to use the correct procedure to

remove and load P2 cards.

E20802 The recorder reboots by

unrecoverable card insertion

error.

E20803 Card is not ready.

Please try to reinsert the card,

or Reboot from Menu.

Check the P2 card and re-insert it, or

reboot the Memory Card Video Recorder.

E22420 Officer’s information file

cannot be loaded.

The officer data file (wid

∗∗∗∗∗

.txt) is

corrupted. Create a new officer’s data

file, save it to a USB memory device

and re-register it.

E22421 Since you are not an

administrator, you cannot

open this menu.

You are not registered as an

administrator and cannot open this

menu. Ask a registered administrator for

assistance.

E22422 Officer’s information file

cannot be loaded.

There is no Officer Registration file

or it contains the wrong data. Create

a correct Officer Registration file

(wofficer.txt), copy it to a USB memory

device and reload it.

E22423 Admin’s information file

cannot be loaded.

There is no Administrator Registration

file or it contains the wrong data. Create

a correct Administrator Registration file

(wadmin.txt), copy it to a USB memory

device and reload it.

E22424 Officer’s information cannot

be setup during record !

Officer data cannot be changed during

recording. Stop recording and start over.

E22620 Couldn’t start auto maintenance Auto maintenance was not performed

because the P2 card slot cover was open

or because recording was in progress.

E25410 GPS communication error.

Please check the GPS module.

An error occurred in the GPS function.

Consult your supplier.

E28201 A capacity of USB strage is

not enough to export.

Use other USB memory device that is

not full.

E28202 Export completed

Restore file remained.

Restore the file not yet restored, and

export it again.

E28203 File not found in P2 cards.

There are no files to export. No export

operation needed.

E28400 No USB storage devices.

Couldn’t start export.

Connect a USB memory device.

E28401 Found read only P2 cards.

Couldn’t start export.

Set the P2 card write-protect switch

away from the write-protect position.

E28402 All USB storages are read only.

Couldn’t start export.

Connect a write-enabled USB memory

device.

Error messages

(continued)

Содержание AG-RCP30P
































































Результаты поиска

Содержание AG-RCP30P

Отзывы:

Похожие инструкции для AG-RCP30P

Бренды по названию

Популярные бренды

Panasonic AG-RCP30P, Руководство по эксплуатации

Результаты поиска

Содержание AG-RCP30P

Отзывы:

Похожие инструкции для AG-RCP30P

Бренды по названию

Популярные бренды