Panasonic ag-hpx600ej страница 99 Скачать руководство пользователя

Страница: 99 / 178

– 99 –

Chapter 5 Preparation — Mounting accessories

Mounting accessories

Mounting the camera on a tripod

When mounting the camera on a tripod, use the optional tripod adaptor (SHAN-TM700).

Mount the tripod adaptor on the tripod.

Tripod adaptor

Pan head

NOTE

Select an appropriate hole in the adaptor, taking into account

the center of gravity of the camera and tripod adaptor

combined.

Also, make sure that the diameter of the selected hole matches

the diameter of the pan head screw.

Mount the camera on the tripod adaptor.

Slide the camera forward along the grooves until you hear a click.

Removing the camera from the tripod adaptor

While holding the red lever down, move the black lever in the direction of the arrow, and slide the camera backward to remove it.

Red lever

Black lever

NOTE

If the tripod adaptor pin does not return to its original position after the camera has been removed, hold the red lever down and move the

black lever in the direction of the arrow again, in order to return the pin to its original position.

Note that the camera cannot be mounted if the pin remains in the center.

Attaching the shoulder strap

Attach the shoulder strap to the shoulder strap fittings.
To detach the shoulder strap, first open the hooks, then detach the strap.

Shoulder strap

Press to open the hook

NOTE

Make sure that the shoulder strap is securely attached.

Содержание ag-hpx600ej



















































































































































































Результаты поиска

Содержание ag-hpx600ej

Отзывы:

Похожие инструкции для ag-hpx600ej

Бренды по названию

Популярные бренды

Panasonic ag-hpx600ej, Руководство по эксплуатации

Результаты поиска

Содержание ag-hpx600ej

Отзывы:

Похожие инструкции для ag-hpx600ej

Бренды по названию

Популярные бренды