114
Setup menu list
C
h
ap
te
r 7 M
en
u O
p
er
at
io
n
s
RECORDING SETUP screen
Item
Description of settings (Items in bold are factory settings.)
REC FORMAT
Selects the recording format for P2 card.
●
59.94Hz System: 1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P, 720P/24P,
720P/30PN, 720P/24PN, 480i/60i, 480i/30P, 480i/24P, 480i/24PA
●
50 Hz System:
1080i/50i
, 1080i/25P, 720P/50P, 720P/25P, 720P/25PN, 576i/50i, 576i/25P
480i (576i)
REC MODE
Selects the 480i (576i) recording mode.
●
DVCPRO50
/DVCPRO DV
REC FUNCTION
Selects the special recording mode.
●
NORMAL
, INTERVAL, ONE SHOT, LOOP
ONE SHOT TIME
Selects the one-shot recording time.
●
1F,
2F, 4F, 8F, 16F, 1s
INTERVAL TIME
Sets the interval time (INT) for interval recording (INTERVAL REC).
●
2F
, 4F, 8F, 16F, 1s, 2s, 5s, 10s, 30s, 1m, 5m, 10m
START DELAY
Sets the START delay time for INTERVAL REC and ONE SHOT REC.
PREREC MODE
Sets PRE RECORDING to ON or OFF. (Fixed to 3 seconds for HD and 7 seconds for SD)
●
ON,
OFF
TC MODE
Selects the time code correction mode when recording the time code output by the internal time code
generator.
●
DF: Uses the drop frame mode.
●
NDF: Uses the non-drop frame mode.
The non-drop frame mode is used when a frame rate of 24P, 24PA, or 24PN is selected in a recording
format regardless of TC MODE setting.
TC IN UB REGEN
Selects the user bits to be recorded when recording signals from a device connected to the TC IN
connector.
●
ON: Records the user bits of the signal input to the TC IN connector.
●
OFF: Records the user bits selected in the menu option UB MODE.
• Setting this option to ON prioritizes the input signal over the settings made in the menu option UB
MODE.
• No user bits are recorded when the input signal does not contain any user bits.
• Settings of the menu option UB MODE are used when no signal is input to the TC IN connector.
UB MODE
Set the content for user information.
●
USER: Records the information of user.
●
TIME: Records the time at recording.
●
DATE: Records the date at recording.
●
TCG: Records the values of the time code generator.
●
FRM. RATE: Records the frame rate information for frame conversion.
a
c
b
d
a: Checking information for user information
b: Frame sequence No.
• 0 to 4 are displayed in 24P/24P (ADV) mode.
• F is displayed in 60i/30P mode.
c: Frame rates
• Frame rate (60/30/24)
• I/P ID
• Conversion data
• Frame rate coefficient
d: Recording management data
• Frame update information
• REC START/STOP information