Panasonic AG-CX6 Скачать руководство пользователя страница 215

Страница: 215 / 221

Firmware Ver. 1.4

—

Support for Simultaneous Output from <SDI OUT> Terminal and <HDMI> Terminal [CX8]/[CX10]

- F 6 -

Notes on the composition of the [VIDEO OUT SEL], [SDI OUT], and [HDMI OUT] menus

The compositions of the [VIDEO OUT SEL], [SDI OUT], and [HDMI OUT] menus have changed as follows:

∫

[VIDEO OUT/LCD/VF] menu

Notes on the FUNCTION screen in mode check

There have been changes to the FUNCTION screen in mode check.

∫

FUNCTION screen

* Available for setting when using

Item

[VIDEO OUT SEL]

[SDI + HDMI OUTPUT]

[EXTERNAL OUT SEL]

[SDI OUT FORMAT]

[HDMI OUT FORMAT]

[LCD/VF OUTPUT]

[SDI SETTING]

[SDI AUDIO GAIN CHG]

[SDI REC REMOTE]

[SDI OUT CHAR]

[SDI OUT ZEBRA]

[HDMI SETTING]

[HDMI TC OUT]

[HDMI REC REMOTE]

[HDMI OUT CHAR]

[HDMI OUT ZEBRA]

Item

Description

[VIDEO OUT]

[VIDEO OUT SEL]

Displays the external output destination.

≥

[SDI+HDMI]:



When [VIDEO OUT/LCD/VF] menu



[VIDEO OUT SEL]



[SDI + HDMI OUTPUT] is set to

[ON]

≥

[SDI]:



When [VIDEO OUT/LCD/VF] menu



[VIDEO OUT SEL]



[EXTERNAL OUT SEL] is set to

[SDI]

≥

[HDMI]:



When [VIDEO OUT/LCD/VF] menu



[VIDEO OUT SEL]



[EXTERNAL OUT SEL] is set to

[HDMI]

[SDI OUT FORMAT]

Displays with [1920



1080p]/[1920



1080i]/[1920



1080PsF]/[1280



720p] the signals output

through the <SDI OUT> terminal.

[SDI OUT CHAR]

Displays with [ON]/[OFF] whether the characters output through the <SDI OUT> terminal are
superimposed.

[HDMI OUT FORMAT]

Displays with [3840



2160p]/[3840



2160p(420/8bit)]/[1920



1080p]/[1920



1080i]/[1280



720p]/

[720



480p]/[720



576p] the signals output through the <HDMI> terminal.

[HDMI OUT CHAR]

Displays with [ON]/[OFF] whether the characters output through the <HDMI> terminal are
superimposed.

[CARD STATUS]

—

Displays the status, remaining recording capacity, and the total capacity of the memory card
inserted in the card slot.
It is not displayed when set to the [NETWORK] menu



[NETWORK FUNC]



[NDI|HX]

The status of the memory card that is displayed are following types.

≥

[NO CARD]: Memory card is not inserted.

≥

[UNSUPPORTED]: Memory card is not supported.

≥

[FORMAT ERROR]: Memory card cannot be used. (Format error)

≥

[PROTECTED]: It is write protected. (The write-protection switch of the memory card is set to
the LOCK side)

≥

[NO REMAIN]: There is no remaining recording capacity.

≥

[NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4 recording.

≥

Cases other than above: The remaining recording capacity is displayed in 0% through 100%.

[TOTAL]

Displays the remaining recording capacity/total capacity of the memory cards in the card slot 1
and the card slot 2.

[SLOT1]

Displays the status and remaining recording capacity/total capacity of the memory card in card
slot 1.

[SLOT2]

Displays the status and remaining recording capacity/total capacity of the memory card in card
slot 2.

CX10

Содержание AG-CX6






























































































































































































































Результаты поиска

Содержание AG-CX6

Отзывы:

Panasonic AG-CX6, Руководство по эксплуатации, Страница: 215 / 221

Результаты поиска

Содержание AG-CX6

Отзывы: