Panasonic AG-AF101AE Скачать руководство пользователя страница 3

Страница: 3 / 52

E-2

indicates safety information.

Caution for AC Mains Lead

For battery charger

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc.

and the other one is only for U.K.

Appropriate mains cable must be used in each local area, since the other type of mains cable is
not suitable.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

How to replace the fuse

1. Open the fuse compartment with a

screwdriver.

2. Replace the fuse

Fuse

FOR U.K. ONLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 5 amp fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a

rating of 5 amps and that it is approved by

ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover

you must ensure that it is refitted when the

fuse is replaced.

If you lose the fuse cover the plug must

not be used until a replacement cover is

obtained.

A replacement fuse cover can be purchased

from your local Panasonic Dealer.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

Camera-Recorder

The rating plate is on the underside of the viewfinder.

Battery Charger / AC Adaptor

The rating plate is on the underside of the Battery Charger and AC Adaptor. Disconnect the AC mains

plug from the AC mains socket when not in use.

Содержание AG-AF101AE





















































Результаты поиска

Содержание AG-AF101AE

Отзывы:

Похожие инструкции для AG-AF101AE

Бренды по названию

Популярные бренды

Panasonic AG-AF101AE, Руководство по эксплуатации

Результаты поиска

Содержание AG-AF101AE

Отзывы:

Похожие инструкции для AG-AF101AE

Бренды по названию

Популярные бренды