Panasonic AFP0HC32EP Скачать руководство пользователя страница 23

Страница: 23 / 102

2.1

Cyclic Communication Function

2-5

2.1.4 Data Area Specifications Using Tag/Instance

In the cyclic communication, the data send and received areas are specified using "Tag" or

"Instance".

•

For "Tag", the areas are specified by symbols. For "Instance", they are specified by

numbers.

•

For some target devices, only either of "Tag" and "Instance" may be available.

•

In the connection of "Exclusive Owner", the receive area of each target is specified by

another tag or instance.

(Note) Even when specifying by tag, numbers are assigned to packets during the actual cyclic

communication.

Exclusive Owner only

Target

Originator

: Opens connection.

: Sends cyclic data.

Data area

Instance (100)

When specifying "Instance"

Tag (Tag_1)When

specifying "Tag"

Tag (Tag_1)

When specifying "Tag"

Instance (100)

When specifying "Instance"

Settings of target and originator

Settings

Originator

Tag/Instance of connected target
Data area/size of originator corresponds to Tag/Instance

Target

Tag/Instance connected from originator
Data area/size of target corresponds to Tag/Instance

KEY POINTS

•

In each connection, the sizes of the data areas which correspond to the

originator and target should be the same.

•

For the FP0H, the data areas of each connection can be allocated to the

operation memories in a maximum of 8 areas. Device names that can be

allocated are WX, WY, WR, WL, LD, and DT. For the automatic allocation, the

WL and LD areas are used.

Содержание AFP0HC32EP







































































































Результаты поиска

Содержание AFP0HC32EP

Отзывы:

Panasonic AFP0HC32EP, Руководство пользователя, Страница: 23 / 102

Результаты поиска

Содержание AFP0HC32EP

Отзывы: