Panasonic AF7CPS Series, Руководство пользователя

Страница: 31 / 82

4.2 Specified using Configurator WD
4-9

Option Setting
Parameter Description Default
End code
This is the code for the AFP7 CCET1 to confirm the end
of the message (data) to be received from the FP7 CPU
unit.
CR, CR+LF or NONE can be selected.
Reception continues until the end of the message (CR,
CR+LF) will be received. When selecting NONE, the end
code is not confirmed.
CR
Judgement time without
termination
Set the wait time for the end code.
If the next message (data) is not received within the
judgment time without termination (ms) after the last
received message (data), the AFP7 CCET1 judges that is
no termination, and performs the following operation.
(End code: when selecting CR, CR+LF)
The received message (data) is discarded. For TCP, the
connection is disconnected.
(End code: when selecting NONE)
The message (data) is transmitted to the connected
destination.
20ms
Destination unit
number and IP
address is
specified
A command is transmitted to the IP address
corresponding to the unit number.
N/A
Unit Number
Specify a station number
Specify a value between 1 and 99 in decimal format
N/A
Target IP
Address
for unit
number
IP Address Specify IP address 192.168.1.100
Action Mode Server Mode is fixed for the "System connection". Server Mode
Protocol Mode
Protocol Mode of Communication cassette AFP7 CCET1
TCP is fixed.
TCP
Communication
Mode
Communication Mode of Communication cassette AFP7
CCET1
MEWTOCOL is fixed.
MEWTOCOL
Source Port No.
Port number that AFP7 CCET1 opens.
Range
： 1025 to 32767
9094
System
connection
Timeout
If AFP7 CCET1 not communicate with a destination
device during this setting time (seconds) in the state that
connection is established, connection will be cut.
Range
：
0 to1800s When 0 is set, the connection will
not be cut.
15 sec