MICRO-IMAGECHECKER
®
Image Processing Device
A210
•
A110
MultiChecker Ver.2 Series
It won’t stop advancing. The monstrously small A Series!
MICRO-IMAGECHECKER
®
A 210
•
A110 MultiChecker V2 Series
■
Table of Product Numbers
■
System configuration diagram
●
Camera cable
Double-speed random
camera cable
Camera extension cable
3 m
3 m: CE
2 m extension: total 5 m
7 m extension : total 10 m
12 m extension: total 15 m
17 m extension: total 20 m
2 m extension : total 5 m: CE
7 m extension: total 10 m: CE
12 m extension: total 15 m: CE
17 m extension: total 20 m: CE
ANM84303
ANM84303CE
ANM84002
ANM84007
ANM84012
ANM84017
ANM84002CE
ANM84007CE
ANM84012CE
ANM84017CE
Vision Backup-Tool Ver.2
English version
ANM70131V2
ANM8828
ANM88281
ANM8804
ANM88041
ANM8808
ANM88081
ANB842
ANB843
ANB843L
ANB845N
ANB845NL
ANB846N
ANB846NL
ANB847
ANB847L
ANM8850
ANM88501
ANB84805
ANB848
CS mount lens
C mount lens
Middle ring
f2.8 CS mount compact lens
f2.8 CS mount compact lens with lock
f4 CS mount compact lens
f4 CS mount compact lens with lock
f8 CS mount compact lens
f8 CS mount compact lens with lock
f6.5 C mount lens
f8.5 C mount lens
f8.5 C mount lens with lock
f16 C mount compact lens
f16 C mount compact lens with lock
f25 C mount compact lens
f25 C mount compact lens with lock
f50 C mount lens
f50 C mount lens with lock
f50 C mount compact lens
f50 C mount compact lens with lock
5 mm middle ring
(0.5/1/5/10/20/40 mm) middle ring
Item
ANMA212V2
ANMA218V2
ANMA212
A210
Multi-Checker V2 : CE
A210
Multi-Checker : CE
A110
Multi-Checker V2 : CE
A110
Multi-Checker : CE
ANMA112V2
ANMA118V2
ANMA112
Specifications
Part No.
NPN Output
PhotoMos Output
NPN Output
NPN Output
PhotoMos Output
NPN Output
Part No.
Part No.
Part No.
Part No.
Item
Specifications
●
Serial Cable
●
Lens / middle ring
Item
Specifications
●
Data backup software
*1 The A100 series connects to one camera.
*2 Use where necessary.
*3 When using 2 cameras with the A200 series,
connect the same type of camera.
Unless otherwise specified, estimate and delivery prices do not include technician dispatching
and other related services. Therefore, for the situations given below, additional charges
may be added.
• Installation and trial operation guidance • Inspections, adjustments, and repairs
• Technical support and instruction
Item
Specifications
I/O terminal block
BNC connector
For input: 1 piece, for output, 1 piece
Monitor BNC jack to PIN jack adapter
ANMA8001
ANM8606
●
Accessories
Item
Specifications
To USA Customer
• Products sold by seller are covered by the warranty and patent
indemnification provisions in its Terms and Conditions of Sale only.
PC
ENTER
A
C
B
High-speed
random trigger camera
High-speed
random cable
Lens
Middle ring
CS mount camera
Keypad
Monitor
Camera extension cable
*2
*1
*3
Serial cable
Controller
PLC (refer to P5)
Panasonic
V-HOLD
BLIGHT
CONTRAST
Video Monitor GP-BM
Microsoft windows NT4.0/95/98/Me/2000 compatible. An operating system is not included with this software.
MICRO-IMAGECHECKER
A100 Series
MICRO-IMAGECHECKER
A200 Series
Item
Progressive Double-speed Random: CE
support electric-shutter with 3 m cable
support electric-shutter with 3 m cable: CE
with 2 m cable
with 3 m cable
with 2 m cable: CE
with 3 m cable: CE
Panasonic GPBM910 (100 V AC/12 V DC)
C mount camera
CS mount camera
Keypad
Monitor
ANM831
ANM832
ANM832CE
ANM85202
ANM85202CE
ANM85203CE
AUGPBM910
ANM85203
Specifications
Part No.
Monitor cable
(Pin-BNC)
However, it is not possible to directly restore type data backed up using
Vision Backup-Tool with the previous product (Ver. 1) to V2 (Ver. 2). In
this case, use the dedicated data conversion software (freeware) to
convert the Ver. 1 type data for V2 use, then transfer it to V2 and perform
a backup again. If you require the data conversion software, contact your
Matsushita Automation Controls Co. Ltd. representative.
*
■
Vision Backup-Tool Ver.2
The product data created with the MICRO-IMAGECHECKER A
series and the image data stored in the controller can be stored
on a PC using Windows.
Stored data can be restored to the A series controller.
COM port
connecting cable
COM port and PC (D-SUB : 9 pin) connection, 3 m
Part No.
Item
Specifications
COM port and PLC (discrete-wire cable) connection, 3 m
TOOL port
connecting cable
COM port and PC (D-SUB : 9 pin) connection, 10 cm
ANM81103
ANM81303
ANM812001
●
MICRO-IMAGECHECKER A-Series Controller
●
Camera / Keypad / Monitor
These materials are printed on ECF pulp.
These materials are printed with earth-friendly vegetable-based (soybean oil) ink.
COPYRIGHT © 2001 All Rights Reserved
Specifications are subject to change without notice.
쮿
Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan
ARCT1B178E 200111-2YT
Matsushita Electric Works, Ltd. Automation Controls Company
