TEMPORARY CONFIDENTIAL
7
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (
A
). Connect the AC adaptor
cord (
B
) by pressing the plug firmly (
C
).
Base unit
L
Use only the supplied Panasonic AC
adaptor PQLV207.
L
Use only the supplied telephone line
cord. If you use a telephone line cord
which is not supplied, the unit may not
work properly.
TG933X(e).book Page 12 Wednesday, September 26, 2007 2:00 PM
(120 V AC,
60 Hz)
To single-line
telephone jack
(RJ11C)
Hook
Charger
L
Use only the supplied Panasonic AC
adaptor PQLV209.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
L
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line
using a Panasonic T-adaptor.
If you subscribe to a DSL service
Please attach a DSL filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– noise is heard during conversations.
B
(120 V AC, 60 Hz)
Hooks
C
