manualshive.com logo in svg

Panasonic 140, Руководство по установке и обслуживанию

Поделиться
Скачать
Panasonic 140 Скачать руководство пользователя страница 25

25

13. Control

ECOi-W units are fi tted with an electronic control system. It provides the command, control and alarm functions.

13.1. Order of priority for control systems

The integrated controller in the ECOi-W can be managed by various interfaces and systems. The order of priority for each drive 
system is as follows:
1.  Timing programming: this scheduling is integrated in the controller
2.  BMS: the remote supervision transmits it commands according to the communication protocols
3.  HMI: the commands are given by the user directly on the unit (integrated display) or remotely (remote display) 
4.  Digital inputs: the client can transmit commands electro-mechanically over 2 dry contacts:
Input D1: ON/OFF
Input D2: confi gurable

13.2. User interface

This terminal has a liquid crystal display and 6 buttons.

13.2.1. Keypad

INFO

From any screen, this button returns the user to the main menu or home screen and, like the ESCAPE 
button, invalidates a current modifi cation.

ALARM

When pressing the alarm button (the red LED fl ashes if an alarm is active), the alarm management menu is 
displayed. (see § alarms)

ESCAPE

Returns to the previous level in the menu tree. Pressing this button during modifi cation invalidates the 
change being made and returns the user to the previous menu. This function is very important if a setting is 
inadvertently modifi ed.

UP/DOWN

These buttons have two functions.
1.  In a menu, they are used to move up and down the list of possible options.
2.  They can change the value of a setting when it has been selected. 

ENTER

This button has three functions 
3.  It is used to access a submenu
4.  Activate the modifi cation of a setting
5.  Validate the modifi cation of a setting

Schedule

Local HMI

Remote BMS

Highest Priority

External contacts

Alarm

Info

Escape

Up

Down

Enter

Содержание 140





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды