Panametrics CTF878, Руководство по обслуживанию

Страница: 20 / 67

Chapter 2.
10 Model CTF878 Service Manual
2.1.3 Resetting to Factory Default Parameters
For various reasons, you might wish to return the CTF878 to its original settings. The Factory Defaults option enables
you to return the meter to its preprogrammed default settings. To enter the option, scroll down to the Factory Defaults
entry in the Service Menu and press [ENTER] . The screen will appear similar to Figure 10 below.
IMPORTANT: All sites and logs will be lost if you use the Factory Defaults option.
Figure 10: The Factory Defaults Option
1. To restore Factory Default settings:
• Press [F2] (Cancel) to return to Operate Mode without changing the current settings.
• Press [F3] (OK) to confirm that you wish to restore the factory default settings.
2. The program asks for confirmation: “Are you SURE?” Repeat the procedure shown in Step 1 above.
The CTF878 replaces the default site file and the global meter settings with the factory default settings, and returns to
Operate Mode.
Site Program Meter Logging
OK
*** WARNING ***
You will LOSE all changes by
pressing OK.
Choose CANCEL to exit or OK to
proceed.
Cancel
Service
Factory Defaults