AC Power
Line Voltage:____________________________________________________120V, 60Hz
Total Current Capacity:__________________________________________________15 A
UL1449 Suppression Rating:____________________________________________330V
Protection Modes:______________________________________________L-N, L-G, N-G
Initial Clamping Level:_________________________________________________200V
Energy Dissipation:______________________________________________1815 Joules
Peak Impulse Current:___________________________________________73,000 Amps
Catastrophic Surge Circuit:_______________________________________________Yes
Thermal Fusing:_______________________________________________________Yes
Over-voltage shutoff:__________________________________________142 VAC ±5 VAC
Under-voltage shutoff:_________________________________________90 VAC ± 2 VAC
EMI/RFI Noise Filtration
Banks 1 - 4:_________________________________________ 90 db, 100 KHz – 2 MHz
Bank 3, High Current Outlets:____________________________60 db, 100 KHz – 2 MHz
Common Mode (all banks)____________________________ 60 db, 100 KHz - 2 MHz
DC Trigger Input
Jacks:_______________________________________________3.5mm (1/8”) mini-plug
Voltage and Polarity:___________________________________3 - 24V DC, bidirectional
Current Requirement:_________________________________4.6 mA @3V, 58 mA @24V
LAN Circuit
Clamping Level:____________________________________________________8V ± 2V
Jacks:_____________________________________________________________RJ-45
Wires Protected:_______________________________________4-Wires, Pins 1, 2, 3 & 6
Telephone Circui
t
(pay-per-view)
Fuseless/Auto-resetting:_________________________________________________Yes
Clamping Level:______________________________________________________260V
Capacitance:__________________________________________________30pf (approx.)
Suppression Modes:____________________________________Metallic & Longitudinal
Jacks:_____________________________________________________________RJ-11
Wires Protected:___________________________________________2-Wire, Pins 4 & 5
DSL Compatible_______________________________________________________Yes
HD Satellite TV Circuit
Bidirectional:__________________________________________________________Yes
Shielded:_____________________________________________________________Yes
Clamping Level:_______________________________________________________27V
Attenuation:______________________________________< 1db from 950MHz-2.05GHz
< 2.4db @ 2.2GHz
Connections:__________________________________________Female “F”, Gold Plated
HD Cable TV Circuit
Bidirectional:__________________________________________________________Yes
Shielded:_____________________________________________________________Yes
Clamping Level:_______________________________________________________1.4V
Attenuation:________________________________________< 1db from 5MHz- 950MHz
Connections:__________________________________________Female “F”, Gold Plated
Pay-Per-View Compatible________________________________________________Yes
MODEL M5300-EX UNIT CARTON
MASTER CARTON
Dimensions
Weight
Dimensions
Weight UPC Qty Dimensions Weight
UPC
17" x 12.75" x 3.5"
17 lbs
23.75" x 19.25" x 9.5" 20.5 Lbs 0 50616 00786 3 1 Same as 20.5 Lbs 5 00 50616 00786 8
4.1" H with feet
Unit Carton
UPC’s, QUANTITIES, WEIGHTS & MEASUREMENTS FOR ORDERING & SHIPPING
OPTIONAL SILVER BEZEL
SILVER BEZEL
PRODUCT
UNIT CARTON
MASTER CARTON
Model # Dimensions
Weight Dimensions Weight
UPC
Qty Dimensions
Weight
UPC
BEZ5300-EXS 17" W x 0.625" D x 3.5" H 14.5 Oz 18" x 4" x 1" 18.5 Oz 0 50616 00792 4 N/A N/A N/A N/A
© 2005 Panamax. Panamax, MAX and the Panamax logo are registered US trademarks of Panamax. Protect or Disconnect and AVM are trademarks of Panamax. SIDACtor is a registered US trademark of Teccor Electronics, Inc.
1690 Corporate Circle, Petaluma, CA 94954
•
800-472-5555 or 707-283-5900
•
Fax - 707-283-5901
•
www.panamax.com
The Power Specialists Since 1975
®
MAX
®
5300-EX REAR PANEL FEATURES
MAX
®
5300-EX SPECIFICATIONS
Specifications subject to change due to product upgrades and improvements.
Circuit Breaker
Automatically opens
when the current load
is greater than 15
Amps.
Ground Lug
Provides a common
grounding point for
equipment with sep-
arate ground leads.
Main Power
Must be plugged
into a properly
wired & grounded
3-wire outlet
Outlet Bank 1
Four always on outlets
. Power will only be turned
off under a fault condition. (See specifications for
over-voltage and under-voltage thresholds) Power
is cleaned by a three-stage balanced Pi filter which
also provides noise isolation from Outlet Banks 2
and 3.
Outlet Bank 2
Four switched outlets
controlled by the front panel
Power Button or the DC Trigger input. Bank 2 will
turn on immediately and turn off after 10 seconds.
EMI/RFI noise filtration is provided by a three-stage
balanced Pi filter which also provides noise isolation
from Outlet Banks 1 and 3.
Outlet Bank 3
Two switched, high current outlets
controlled by the front
panel Power Button or the DC Trigger input. Bank 3 has a 5
second turn on delay and turns off immediately. The High
Current outlets provide power from a low impedance noise fil-
tration circuit that does not limit the current to your equip-
ment. Its output is noise isolated from all other outlet banks.
Voltage Sense
Trigger Input
3.5mm (1/8”) Mini-Plug
jack. Connect to a remote
trigger device that uses a
DC output to trigger a start-
up/shutdown sequence.
This bypasses the front
panel power switch.
LAN Jacks
Protection circuits
for 10/100 baseT
Ethernet lines.
Phone Jacks
Protection circuits for standard
telephone or pay-per-view lines.
Phone circuit is auto-resetting.
Satellite TV Coax Jacks
Bidirectional protection circuit optimized
for satellite TV signal lines.
Cable TV Coax Jacks
Bidirectional protection circuit opti-
mized for cable TV, off-air antennas
and cable modem signal lines.
