manualshive.com logo in svg

Panacom PMS8232, Руководство пользователя, Страница: 7 / 16

Поделиться
Скачать
Panacom PMS8232 Скачать руководство пользователя страница 7

Installation

          PMS8232  /  PMS4232                        Page 

4

Installation

Operating System Installation

Windows 95/98/NT

Run Setup on Disk 2 of the Serial Utilities Software.

Windows 3.1x

Refer to the Win3x.hlp file in the \Win31 directory on Disk 1 of the Serial Utilities Software.

DOS

Refer to the Readme.txt file found in the \DOS directory on Disk 1 of the Serial Utilities Software.

Other Operating Systems

Refer to the appropriate directory on Disk 1 of the Serial Utilities Software.

System Installation

The

 PMS8232 

can be installed in any of the PCI expansion slots and contains a single jumper strap that

must be set for proper operation. Please see the Card Setup section of the manual for information on this
jumper.

1.

 

Turn off PC power. Disconnect the power cord.

2.

 

Remove the PC case cover.

3.

 

Locate an available PCI slot and remove the blank metal slot cover.

4.

 

Gently insert the 

PMS8232 

into the slot. Make sure that the adapter is seated properly.

5.

 

Replace the screw.

6.

 

Replace the cover.

7.

 

Connect the power cord.

Installation is complete.

Содержание PMS8232

















Отзывы:

Нет отзывов