PANA
10
responsibility or to perform work on it and can identify and control possible risks to
the patient and the trolley.
LOAD BEARING CAPACITY
Do not exceed the safe working load mentioned above
7.
OPERATIONAL :
•
Before putting the trolleys into use for the first time ensure that all the transport
securing devices and packing film are removed
•
Clean and disinfect the trolleys before the first time use
•
The trolleys should be used on a flat floor
•
The force required to move the trolleys from one place to another with/without
patient may vary depending on the flooring conditions
Do not use the trolleys for purposes other than the intended use as it may cause
damage to the patient/equipment
With due consideration to environmental limitation, materials used to make the
device are not affected by contact with any biochemicals or biowaste when used as
per its intended purpose, all materials used in the product and accessories do not
facilitate breeding or growth of bio-contaminants on their own.
8.
MAINTENANCE & CLEANING
Maintenance
Each time before putting the trolleys into service the user must check that –
•
Lubrication of all the mechanical joints/pins / moving parts / tightening of the bolts
should be carried out at least once in three months, to avoid unnecessary sound
and wear & tear of the Trolleys
•
At regular intervals carry out a visual inspection and check for any mechanical
damage (e.g loose I missing rivets, screws, etc.)
•
If any damage or malfunction is observed, immediately report this matter to the
operator