© Pan Acoustics GmbH
V 1.0
Page 5 of 6
Assembly Manual
Speaker Mount TWM II
5. Transport and storage
The product is to be transported with care to prevent any damage that would impair its function.
The product is designed for both indoor and outdoor applications. Prolonged storage in liquids, e.g.
water, is to be avoided.
Fasten swivel bracket (A)
with 2 set screws (B)
in the rear slot.
Attach fastening bracket (C)
(position above the speaker)
to the wall using two suitable
screws. Observe the spacing
between the brackets accord-
ing to the table "Assembly
spacing of brackets".
Attach fastening bracket (C)
(position below the speaker)
to the wall using two suitable
screws. Observe the spacing
between the brackets accord-
ing to the table "Assembly
spacing of brackets".
Mount the installed swivel
bracket (A) (position above
the speaker) with screw (D)
and washer (E) onto fastening
bracket (C).
Mount the installed swivel
bracket (A) (position below
the speaker) with screw (D)
and washer (E) onto fastening
bracket (C).
Check all screw connections for fi rm fi t and friction locking. The individual assemblies are to be
checked to ensure that they are form fi tting, and screw connections are to be re-tightened where
appropriate.
Model
P 02-Pi
P 04
PB 04
P 08-Pi
PB 08
P 16-Pi
PB 16
Spacing of
brackets
242 mm
469 mm
920 mm
1826 mm
Assembly spacing of brackets
For spacing
of brackets,
see table
