© Pan Acoustics GmbH
V 1.0
Page 4 of 18
Manual
1. Product description
Thank you for choosing a product from Pan Acoustics. The passive loudspeakers from the Pan AMT
series combine architecturally appealing design with fl exible connections. Depending on the model,
low impedance, 100 V and RJ variants are available.
The Pan AMT series off ers a comprehensive range of loudspeakers for diff erent applications such as
traditional AV installations, theatre, immersive sound and outdoor applications.
All loudspeakers from the Pan AMT series feature:
•
appealing design
•
natural and unaltered audio reproduction
•
fl exibility and modularity
Please read this operating manual carefully prior to startup in order to guarantee fault-free operation.
This symbol provides important instructions for the proper handling of the
product. Failure to observe this instruction may result in damage to the
product or malfunctions.
2. Symbols and explanation
This symbol indicates a hazard with a high level of risk. If this hazard is not
avoided, serious injury or death may result.
This symbol indicates a hazard with a medium level of risk. If this hazard is
not avoided, moderate to serious injury or death may result.
This symbol indicates a hazard with a low level of risk. Failure to observe this
instruction may result in minor injuries or damage to property.
All information in this operating manual is based on the product properties available at the time of
preparation and the safety regulations applicable at that time.
This operating manual describes the setup, function and connection of the Pan AMT loudspeaker sys-
tems P 04-AMT | RJ and P 04-AMT | RJ (mB). It is aimed at system technicians and persons assigned
the task of installing and operating a relevant system.
Pan Acoustics reserves the right to make changes and modifi cations within the scope of legal regula-
tions and product improvements without prior notice.
This operating manual and all additional information required for operation must be read prior to
use by all persons involved in commissioning. The operating manual and all additional information
required must be kept within reach near the device.
All necessary information and documents can be obtained from the Pan Acoustics website,
https://www.pan-acoustics.de/en/service/download
, or by sending an e-mail to
.
3. General information and target group
4. General safety regulations
The following safety regulations must be read completely and diligently before putting the device
into operation and must then be kept in a safe place near the device. Reading the operating manual
does not replace the knowledge and observance of all valid local safety rules and regulations. The
information and technical specifi cations published in this document are based on data available at
the time of publication. We reserve the right to make changes to the product aimed towards product
improvement and adjustment to new applicable standards.
NOTICE
CAUTION
WARNING
DANGER
