Installation using the Smart-SCART adapter (automatic switching).
1)
Insert the Smart-SCART adapter into your television.
2)
Connect the
YELLOW phono plug
from the TV-Eye camera lead
into the
YELLOW phono socket
on the SCART adapter.
See Fig B
3)
Connect the
BLACK phono plug
of the TV-Eye camera lead into
the
BLACK phono socket
on the SCART adapter.
See Fig B
4)
Connect the
BLACK phono socket
from the transformer to the
BLACK phono plug
on the SCART adapter.
See Fig B
5)
Plug the transformer into a wall socket and switch the socket
on.
6)
Press the ON button at the base of the TV-Eye.
7)
Switch the television on.
8)
To use automatic switching you must turn the TV-Eye on and off
using the white torpedo switch only (see Fig B). Leave the
ON/OFF button located on the base of the TV-Eye switched ON
all the time. When the TV-Eye is switched on, using the torpedo
switch your television will automatically show the TV-Eye
picture. When the TV-Eye is switched off using this switch the
television will revert back to the programme picture.
IMPORTANT:
The lamp on the TV-Eye will be on when it is active.
Make sure the dimmer wheel is fully towards you.
2
