Take out the front grid to clean the reflector (reflecting mirror) and the filament and apply
the instructions on page 15.
D-Repair and Service (page 16)
Attention! Only technical services and persons authorized by professional
maintenance staff may serve, repair and replace the parts of this heater.
Distinguished Customer:
Please read safety instructions carefully for the security of you, your family and your
belongings before operating your appliance.
3. Installation
3.1 Installation Instructions
There are 4 brackets and fasteners used with the heater. Furthermore, in the
canal of back side of the heater there are 4 square fastener washers 25×25mm.
1
Measure the installation position of the heater on the wall, and drill holes at
an appropriate distance on the wall parallel to the ground. (At least 1.8 m from the
floor and at least 0.5 m from the ceiling).
2
Two brackets are fastened by the help of fasteners.
