6
UNPACKING INSTRUCTIONS
Carefully remove your Commander II from its shipping carton making sure there is no dam-
age evident from shipping. If there is any damage, notify the delivering shipper immediately,
fully describing the damage.
Do not destroy the packing material, since it may be reusable later, should you require fac-
tory service, or need to transport the Amplifier for any other reason.
TRANSFORMER INSTALLATION
Due to its weight, the power transformer is shipped separately to prevent damage to the am-
plifier cabinet, and it must be installed by purchaser.
In order to install the HV transformer, both the top and bottom covers amplifier covers must
be removed. The small plastic bag (shipped with amplifier) contains the transformer mounting
hardware.
The following photographs illustrate the proper HV transformer installation:
This is the area the transformer
mounts in. Pay attention to the
wiring harness (1) at the rear and
be careful not to pinch any of the
wiring under transformer during
installation. Note that the con-
nector (2) has been moved to the
side, out of the way
Position the HV transformer with
the wires and connector as
shown.
1
2
