Palsonic TFTV700HL, Руководство пользователя

Страница: 22 / 33

21
TV Operation and System Setup
 Record File Format
Select between TS and PS.
 Partition Select
Select a disk to store the recorded file.
Press the ▲▼ button to select Partition Select and press the OK button to prompt a
sub-menu.
Press the ▲▼ button to select desired disk and press OK to confirm. Also you can
format the selected storage device by press the red coloured button or set one of
them as the default partition. The available item varies depending on the external
USB device connected to the unit.
NOTES:

We cannot guarantee compatibility (operation and/or bus power) with all USB
mass storage devices and assumes no responsibility for any loss of data that
may occur when connected to this unit.

With large amounts of data, it may take longer for the system to read the
contents of a USB device. Unit may require longer time to format depending on
the volume of the USB device.

Some USB devices may not be properly recognized.
 Even when they are in a supported format, some files may not play or display
depending on the content.
 Please make sure the USB device's file system is FAT32.

USB device must be a high speed USB2.0 in order to operate properly.
 Timeshift Buffer
Press the ▲▼ button to select Timeshift Buffer and press OK; then use the
direction buttons to select the desired setting.
 Timer
Press the ▲▼ button to select Timer and press OK, all the scheduled timer will be
listed.
In the timer list, you can:
Use the red coloured button to delete a timer.
Use the green coloured button to delete all the timers.
Use the yellow coloured button to add a new timer.
Use the blue coloured button to edit a timer.
 Record List
Press the ▲▼ button to select Record List and press OK, all the record will be
listed.
In the record list, you can:
Press the red coloured button to delete a timer.
Press the OK button to play the record.