SET
CLEAR
CLEAR
CLEAR
FUNCTION
FUNCTION
TUNE TUNE
TUNE TUNE
TUNE TUNE
Searching
Playing CD
CD
Winding
Playing tapes
TAPE
9
TAPE: To play back prerecorded tapes and to record tapes.
For tape recording see page 10-11.
Select the
TAPE
function.
Open the tape compartment to load the
tape.
Be sure to have the open part of the
cassette downwards and the tie left
hand spool fully wound.
Close the compartment door again,
pushing it softly.
Start playback.
Start reverse playback (AR only)
Stop playback.
Stop playback.
Fast rewind or advance the tape.
On the remote control select the TAPE function pressing the FUNCTION button.
For tape recording see page 10-11.
The tape counter resets to "0000" when a tape compartment is opened ("0000" need not be the
beginning of the tape).
On the machine select the CD function, by pressing the FUNCTION button repeatedly.
When the disc stops the machine shows its total time.
During playback the machine shows the current track number, and the track's play time.
Please read remarks about discs on page 13.
When playing a CD-RW disc, cannot play a unfinalised CD-RW disc.
In case of playing the multi-session CD-RW disc, can play the first session only.
Discs recorded by personal computer or high speed recording may not be played (or cause
noise) according recording format.
It is recommended to record discs record as low speed as possible or using recordable CD for AUDIO.
Select the CD function.
Open the disc compartment to
load a disc.
Be sure to have the disc label facing
upwards.
Start playback.
Stop playback.
If you want to interrupt playback
briefly - and to continue.
To select a specific start track.
To search for a particular point
on the disc reverse or forward. (hold
pressed the button more than 500ms)
PUSH
/OPEN
