background image

20. DIGITAL KEYBOARD

       In single-digit mode, press these buttons to select any of 0~9 channels.

       In double-digit mode, press these buttons to select any of 00~39 channels.

TELETEXT FUNCTIONS

6. BROWSER (PR+)

    With the set in Teletext mode (press button 15 first), press this button to select a Teletext

    page at random. Whether this function works or not depends on the Teletext system.

   Austext seems to ignore it.

7. PR- (LIST or FASTEXT)

    In Teletext mode (press button 15 first), press this button to select LIST mode of 

    FASTEXT mode. (This works with the colour-coded buttons-see below).

    In LIST mode, the character "L" is displayed in the bottom left corner of the screen. You

    can then select any of the four colour-coded buttons to select the stored page number. (For

    information on how to change page numbers, see TELETEXT PAGE NUMBER STORE in

    an earlier section).

    In FASTEXT mode, the information on the four coloured buttons is set by the TV

    station.

11. TIME/TEXT (

    This sets the sub-page number in Teletext mode, for those pages which have multiple

   subpages. The number is entered using the 0~9 keyboard when the screen shows

   S * * * *.

   For sub-page 3 of page 210 first enter "2" "1" "0" and then press TIME/TEXT to

   show S * * * *. Then enter 0003 to fill in the numbers. The black & red display at the

   foot of the page will now show 210 + 0003, indicating that Teletext will search for sub-

   page 0003 of page 210 and will not display it on the screen until it finds it. If you enter

    just "3" instead of "00003",  it does not work.

   WARNING: If you enter the sub-page number of a page that does not have a sub-page,

   then it never finds it! If you enter "3000" instead of "0003" Teletext will search for

   page sub-page 3000, and never find it! Using the TIME/TEXT feature does not help

   Teletext find the sub-page any sooner. It still has to wait until the page comes around.

12. PAGE UP/DOWN ( -      +)

   These buttons change the page selection one at a time up and down. It is a quicker way

   than using the keypad when the page you want is nearby.

13

15. TELETEXT (      )

This button activates Teletext and puts the Teletext display on the screen.

16. CANCEL (X)

This button is used to return to TV while Teletext is searching for a page. The search
continues in the background, and when the page is found it puts the page number on the
upper left of the TV picture. To view the page, press button (15) to see Teletext, or
button (17) to mix.

S102

press "+"

press "-"

press "+"

press "-"

S101

S100

Содержание MODEL 5139






















Отзывы: