E-7
USB DRIVE AND SD-CARD FLASH MEMORY MP3
PLAYBACK
- THIS UNIT IS EQUIPPED WITH A USB SOCKET WHICH CAN ACCEPT AND PLAY MP3
FILES STORED ON STANDARD USB FLASH DRIVES (ALSO KNOWN AS "PEN DRIVES")
WHICH ARE FOR MEMORY STORAGE. (COMPATIBLE WITH USB VERSION 1.1 & 2.0).
- THIS UNIT IS ALSO EQUIPPED WITH AN SD CARD SOCKET WHICH CAN ACCEPT AND
PLAY MP3 FILES STORED ON STANDARD "SD CARDS WHICH ARE USED FOR
MEMORY STORAGE.
- SLIDE THE FUNCTION SWITCH TO "CD (CD-MP3/ USB-MP3/ SD-MP3) POSITION.
- TO UTILISE THIS FACILITY, FIRST INSERT EITHER A USB-RIVE OR A SD-CARD INTO
THE CORRECT SLOT.
- PRESS AND HOLD (FOR 2 SECONDS) THE "STOP/ CD/ USB/ SD" KEY REPEATEDLY
TO SELECT BETWEEN:
- THE DISPLAY WILL SHOW THE "USB" OR "SD" SYMBOL & WILL CHECK IF ANY MP3
SONG FILES ARE FOUND.
- IF MP3 FILES ARE FOUND, THE SET WILL START PLAYBACK OF THE FIRST MP3
SONG FILE & THE DISPLAY WILL INDICATE THE TRACK NUMBER INFORMATION
JUST LIKE A MP3-CD PLAYBACK.
- PLAYBACK CONTROL (PLAY, PAUSE, BACK, NEXT, STOP) ARE ALSO EXACTLY SAME
AS WITH A MP3-CD DISC.
- YOU MAY ALSO USE THE "SKIP +10/ FOLDER" KEY IN THE SAME MANNER AS WITH
MP3-CD PLAYBACK.
- YOU CAN ALSO PROGRAM THE PLAYBACK OF UP TO 99 MP3 TRACKS (SONGS)
SIMPLY FOLLOW THE SAME PROCEDURE AS DESCRIBED IN THE PREVIOUS
SECTION : "PROGRAMMING THE CD-PLAYER".
CD/ CD-MP3
DISC
USB
PEN-DRIVE
SD
CARD
IMPORTANT
REMOVAL OF USB DRIVES & SD-CARDS
NEVER REMOVE (OR UNPLUG) USB-DRIVES OR SD-CARDS FROM THE SET
DURING PLAYBACK OF MP3 SONGS FROM THESE MEDIA. ALWAYS PRESS
STOP FIRST AND THEN SLIDE THE FUNCTION SWITCH TO ANOTHER
SOURCE (eg. "RADIO" OR "TAPE") BEFORE REMOVING OR UNPLUGGING USB/SD
MEMORY, TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.
IMPORTANT POINT
Please do NOT use a USB Extension Cable to connect your
USB FLASH DRIVE to the USB PORT of this unit.
Such cables can pick up additional interference which can corrupt the
data flow, preventing normal operation and usage of the USB port.
Always connect your USB Flash Drive DIRECTLY to the USB PORT without
any USB extension cables.
E-8
CASSETTE TAPE PLAYBACK
- SLIDE THE FUNCTION SWITCH TO THE "TAPE (OFF)" POSITION.
- OPEN THE CASSETTE DOOR BY PRESSING THE "STOP/EJECT" CASSETTE BUTTON.
- INSERT A PRE-RECORDED CASSETTE WITH THE TAPE-SIDE UP, INTO THE PROPER
GUIDE-RAILS ON THE INSIDE OF THE CASSETTE DOOR.
- GENTLY PUSH THE CASSETTE DOOR FORWARD (INWARDS) TO CLOSE IT. MAKE
SURE THE TAPE IS FULLY AND PROPERLY INSERTED BEFORE DOING SO.
- PRESS THE CASSETTE-PLAY BUTTON. THIS WILL START THE PLAYBACK. NOTE
THAT THE TAPE MOVES FROM RIGHT TO LEFT.
- ADJUST THE VOLUME TO THE DESIRED LEVEL.
- THE TAPE PLAYBACK CAN BE STOPPED AT ANYTIME, BY PRESSING THE "STOP"
BUTTON. AT THE TAPE'S END, THE SET SWITCHES ITSELF OFF AUTOMATICALLY,
AND RELEASES THE PLAY BUTTON AT THE SAME TIME.
- PRESS THE "STOP" BUTTON FOLLOWED BY THE "REWIND" OR "FAST-FORWARD"
BUTTON TO REWIND OR FORWARD THE TAPE AT HIGH SPEED.
CASSETTE TAPE RECORDING
- OPEN THE CASSETTE DOOR BY PRESSING THE "STOP/EJECT" CASSETTE BUTTON.
- INSERT A BLANK CASSETTE WITH THE TAPE-SIDE UP, INTO THE PROPER GUIDE -
RAILS ON THE INSIDE OF THE CASSETTE DOOR.
- GENTLY PUSH THE CASSETTE DOOR FORWARD (INWARDS) TO CLOSE IT. MAKE
SURE THE TAPE IS FULLY AND PROPERLY INSERTED BEFORE DOING SO.
- THE SET IS NOW READY TO START RECORDING, WHICH CAN BE DONE FROM
EITHER THE RADIO OR CD-PLAYER.
NOTE:
ALTHOUGH THIS PRODUCT IS FULLY COMPATIBLY WITH USB 1.1 & 2.0
STANDARDS, A SMALL PERCENTAGE (ABOUT 5%) OF USB FLASH DRIVES
MIGHT NOT BE READABLE, DUE TO THOSE USB-FLASH DRIVE
MANUFACTURERS NON-COMPLIANCE WITH THE FULL (OFFICIAL)
USB 1.1 / 2.0 STANDARDS.
IMPORTANT: THIS UNIT DOES NOT SUPPORT USB-MP3 PLAYER, DUE TO
THEIR INHERENT LACK OF SOFTWARE COMPATIBILITY. ONLY USB
"PEN DRIVES" (FLASH MEMORY USB DRIVES) CAN BE USED, FOR MP3
PLAYBACK.
IMPORTANT
MP3 FILE NAME FORMAT
PLEASE TAKE CARE TO USE ONLY REGULAR ENGLISH ALPHABETS
(A TO Z) & NUMERALS (0 TO 9) IN THE FILE NAMES OF MP3 SONGS.
CHARACTERS SUCH AS " _ " (UNDERSCORE) & " " (SPACE) MAY
RESULT IN THE FILES BEING UNREADABLE OR INCONSISTENTLY
UNRECOGNISABLE BY THE PLAYER.
