8
CHILD LOCK
1.
2.
The purpose of this key (6) is to prevent the child from watching the TV when the parents
are not around by keeping the RC keypad.
When this key is pressed, a OSD symbol will be displayed permanently to inform the
user that it is in Child Lock mode. The user can then keep the remote control keypad in a
safe place and switches off the TV.
3.
4.
5.
Whenever the TV is power up by the local keyboard, the Child Lock OSD will be displayed
on a blank screen and will automatically switch to standby after 5 minutes. Thus, without
the remote control keypad, the child will not be able to watch the TV.
When the TV is power up by any one button of the remote control keypad, the Child Lock
OSD is still displayed with the TV operating as normal.
In Child Lock mode, the Child Lock OSD will always remain on screen. To reset the Child
Lock function, press the key again and the OSD will disappear to indicate that Child Lock
mode is off.
SLEEP TIMER
1.
2.
3.
When / key (10) is first press, OFF will be shown. Subsequent press will
increase in steps of 15 minutes from 15 to 120 minutes. Once 120 minutes is reached,
the next step is OFF.
Once the desired sleep time is set, the OSD will disappear after 5 sec. To display the
balance time after a time lapse, the same key can be pressed again.
When this key is pressed once while the sleep timer is ON, it will display the balance time
left. Subsequent press will set the sleep timer to the next higher step values.
Green
OSD
