llllllllllllll
1. Press the PSET (PRESET ON/OFF) button on the front panel. The current band and
channel position will be displayed on screen (in green).
2. Press AUTO (AUTO PRESET) button, the appliance will search the signal of TV station in
the order of VHFL, VHFH and UHF, as shown in the following, and memorise them from
channel number 1 position.
* During presetting, the green block turns into yellow.
The moving red block indicates the change of tuning voltage.
3. When presetting is over, the channel position is set to number 1 automatically.
4. Press PSET (PRESET ON/OFF) button to exit preset mode.
NOTE: During presetting, auto presetting will be cut off if any one of STAND BY button,
PRESET ON/OFF button or AUTO PRESET button is pressed.
MANUAL TUNING
1. Press PSET (PRESET ON/OFF) button to set preset mode.
2. Select a channel position.
* If “SKIP” displays on the screen, press "SKIP" button on the front panel to exit "SKIP"
mode.
3. Press and hold manual tuning button "FT " "FT " till your desired program appears.
4. Press PSET (PRESET ON/OFF) button to exit preset mode.
The searched program station has been memorised at the present channel position.
5. Repeat 1 ~ 4 steps to search another channel.
5
CHANNEL PRESET
AUTO PRESET
.
6
15
UHF
VHFL
VHFH
.
UHF
UHF
VHFH
VHFH
VHFL
VHFL
CH
CH
8 SKIP
SKIP
llllllllllllll
8 VHFH
