Palram CANOPIA EZ LINK KIT, Как собрать

Страница: 5 / 57

IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly,
please refer to the relevant assembly step for important
additional comments.
Step 4: In all relevant patio cover sizes, you may choose either of these
2 assembly options:
Option 1 (Steps 4+5+6+9+10+11+12) - assembling all posts supplied.
Option 2 (Steps 4+7+8+9+10+11+12) - Whenever you are using this
EZ Link Kit you may give up using one leg.
Step 6: (Option 1) : make sure the distance between the post
and the connection point does not exceed 60 cm / 23.6 inch.
The Maximum distance between the posts may not exceed
120 cm / 47.2 inch.
Step 10: Before performing this stage, return to the patio cover assembly
manual at the stage of "
assembling the roof system " as follow:
Feria Tuscany Olympia Sierra/Capri Carnival
3x3 - Step 15 3x3 - Step 14 3x3 -Step 11 2.3x2.3 - Step 12 3x3 - Step 18
3x4.25 - Step 22 3x4.25 - Step 20 3x4.25 - Step 17 3x3 - Step 11 3x4.25 - Step 16
3x5.46 - Step 21 3x5.46 - 20 Step 3x5.46 -Step 17 3x4.25 -Step 15 -
4x4.25 - Step 26 - - 3x5.46 - Step 15 -
Step 12: Tightening the bolts is done from the inner part.
Spread silicone follow the connection (a,b).
Step 2: To assemble the rear profile please refer to the patio cover assembly
manual at the stage of " holes marking " as:
Feria Tuscany Olympia Sierra/Capri Carnival
3x3 - Step 7 3x3 - Step 7 3x3 - Step 5
All sizes
Step 5
3x3 - Step 6
3x4.25 - Step 6 3x4.25 - Step 9 3x4.25 - Step 7 3x4.25 - Step 5
3x5.46 - Step 9 3x5.46 - Step 9 3x5.46 - Step 7 -
4x4.25 - Step 12 - - -
* For fixation to the wall, return to step 2 .
Step 3: Connect part 8303 (drawings a,b) and than return to the patio cover
assembly manual as follow:
Feria Tuscany Olympia Sierra/Capri Carnival
3x3 - Step 8 3x3 - Step 8 3x3 - Step 6 2.3x2.3 - Step 7 3x3 - Step 10
3x4.25 - Step 13 3x4.25 - Step 13 3x4.25 - Step 11 3x3 - Step 6 3x4.25 - Step 9
3x5.46 -Step 13 3x5.46 - Step 13 3x5.46 - Step 11 3x4.25 - Step 9 -
4x4.25 -Step 16 - - 3x5.46 - Step 9 -
* After completion, perform drawing c at this step.
EN INFORMATION