•
Scan settings
By default, FM scans stop at any available station. This may
result in a poor signal-to-noise ratio (hiss) from weak stations. To
change the scan settings to stop only at stations with good signal
strength, select Yes after choosing Strong station only?
•
Audio settings
All stereo stations are reproduced in stereo. For weak stations,
this may result in a poor signal-to-noise ratio (hiss). To play weak
stations in mono, select FM weak reception: Listen in mono only
and then YES.
5.9
Bluetooth
In Bluetooth mode, JOJO enters the pairing mode automatically. You can turn on the
Bluetooth of your Bluetooth device and search the radio JOJO to pairing. When JOJO
is waiting for pairing, there is a blinking Bluetooth icon at the bottom. If the pairing is
successful, it has a
“beep”
sound and the Bluetooth icon becomes steady.
Control the music playback from your Bluetooth device.
To unpair from JOJO, press and hold
or
and choose BT
disconnect or press and hold
to unpair Bluetooth.
5.10 CD
JOJO can playback CD-DA format audio CD-R/CD-RW discs
that have been finalised*
upon completion of recording. It may fail to play some CD-R/CD-RW discs due to poor
recording and wide variation in quality of the CD-R/CD-RW disc.
