
11
1. Make sure that the ignition lever is in the “OFF” position. Open Main Gas Supply Valve fully.
2. Push down Ignition Lever until a sharp “click” is heard. Keep holding lever down for about 3
seconds after pilot burner lights (until Safety Device locks in).
•
When using for the first time, burner will not light until air in pipe is completely discharged.
•
If burner fails to light, repeat ignition procedure.
3. Regulate heat according to room size. Pushing down Heat Settings Lever decreases heat to half
capacity. Do not keep lever at intermediate position.
•
Burner Surface:
4. To turn off burner, lift ignition lever up to “OFF” position.
•
Shut off Main Gas Supply Valve for absolute safety when heater is not in use for long periods
of time.
•
Note:
Air Mixture is adjusted at factory, no further adjustment is necessary.
Operating Instructions
Содержание PG-451S
Страница 4: ...4 Specifications...