PaloAlto Networks PA-5400 Series, Справочник по аппаратуре

Страница: 44 / 92

44
PA-5400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-5400 Series Firewall Installation
©
2021 Palo Alto Networks, Inc.
Install the Mandatory PA-5400 Series Firewall
Front Slot Cards
The PA-5400 Series firewalls require a minimum of three cards that you install in the front slots of the
appliance. These cards are shipped separately from the firewall and include the following: The Management
Processor Card (MPC) provides management connectivity to the appliance and HA connectivity; the
Networking Card (NC) enables the firewall to process network traffic; and the Data Processor Card (DPC)
handles data-plane processing.
•
Install a PA-5400 Series Firewall Management Processor Card (MPC)
• Install a PA-5400 Series Firewall Networking Card (NC)
• Install a PA-5400 Series Firewall Data Processor Card (DPC)
Install a PA-5400 Series Firewall Management Processor Card
(MPC)
STEP 1 | Attach the provided ESD strap to your wrist and plug the other end in to the ESD port location
on the front of the appliance. See PA-5450 Front Panel for the location of the ESD port.
STEP 2 | Remove the MPC from the antistatic bag. Push the top and bottom ejector tabs towards each
other to allow the ejector levers to rotate into an open position.