PaloAlto Networks ION 2000, Справочник по аппаратуре

Страница: 28 / 34

Install ION 2000
Set Up the ION 2000 with an Exisng Router
The analyc or control mode with an exisng router allows you to insert the ION 2000 without
modifying any network sengs at the remote office. The ION 2000 ulizes an inline inseron
method with fail-to-wire redundancy to accomplish this. The inline inseron method enables the
ION device to inspect or process traffic by only requiring physical changes to the network while
maintaining or enabling addional redundancy.
While the control mode removes an exisng router at a site, it is oen simpler and less intrusive to
deploy in the control mode with an exisng router. In this scenario, you can unplug or disable the
exisng router aer all funcons are verified.
STEP 1 | Prepare the cabling of the ION 2000 to insert it into your network.
Ensure that internet access via a private WAN connecon or direct internet broadband is
available at your site to allow for remote configuraon of the ION 2000.
STEP 2 | Mount the ION 2000 in the desired installaon locaon before powering on or making any
network modificaons.
STEP 3 | Connect the power cable to the ION device and then plug the device power cable into an AC
power outlet.
STEP 4 | Power on the ION 2000 device.
When the device is powered on, the power indicator turns green.
ION 2000 Hardware Reference 28
©
2021 Palo Alto Networks, Inc.