FOREST TRAILER PALMS 101
Ver 1.00 EN © 2010 Palmse MK
4
2.3 Hydraulic
system
•
Hydraulic system must be serviced by qualified and experienced hydraulics
mechanic only
•
Continually inspect the condition of hydraulic system. Repair all safety en-
dangering defects immediately
•
Before starting repair work or maintenance make sure, there is no pressure
in hydraulic system
•
Use safety goggles and gloves during repair work and maintenance
•
Use original spare parts or parts recommended by the manufacturer
•
Prevent oil dripping to the ground to avoid environment pollution
•
In ecologically sensitive areas use bio-oil
2.4 Operation
•
Ensure, that forest trailer is in good working condition
•
Operating with damaged or defective machine is prohibited
•
Ensure, that you have control over all the working area
•
Prevent entering unauthorized persons to the working area
•
Support legs must be used while forest trailer is being loaded
•
Be sure not to endanger anyone while lowering the support legs
•
Use parking brake while loading
•
Do not load over the upper edge of safety screen
•
Loading short logs be shure they are supported at least with two pairs of
bolsters
•
Follow strictly load limits stated by the manufacturer for certain trailer
•
Pull the support legs up before moving forest trailer
•
Release parking brake
•
Pay extra attention driving with unlocked drawbar
•
Prevent any hoses between trailer and tractor to be squashed on sharp turns
•
For driving on roads lock drawbar in straight position with locking shaft
•
Make shure signal lights are unfolded and working for driving on public roads
•
Follow traffic regulations
•
Max speed by manufacturer for certain forest trailer is 40 km/h
•
Manufacturer is not responsible for damage or loss, caused by misuse or
incorrect, careless and inappropriate use of the machine
