PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49)
2
When PA168V MGCP FXS gateway is properly installed, you can set each
parameter through PC and Telnet commands.
Details please refer to
《
PA168V MGCP FXS gateway Spec and Install
》
¾
Telnet Configuration
●
On the PC choose
Start>Run
, type
telnet 192.168.1.100
into
Run
field
in popuping Run dialog. Or input
telnet 192.168.1.100
in the DOS
window. Then the following information will be displayed.
PA168X V1.49 settings
Password :
Then please type password. With debug set as 0[disable], if you type ordinary
password (default one is 1234), after Retun, you will see
：
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
The above information indicates that PA168V FXS gateway is under setting
mode, and then you can set the PA168V FXS gateway by using the telnet
commands.
¾
PA168V Telnet Commands Explanation
Command Function
