Palmgren CS 250, Руководство по эксплуатации

Страница: 22 / 49

Assembly
Page 22
3.4.6 Mount the saw blade
« Mount your saw blade “Mounting and replacing the saw blade“ on page 39
3.5 First use
WARNING!
Personnel and equipment may be endangered if the circular metal saw is first used by
inexpert staff.
We do not take liability for any damage caused by incorrect commissioning.
3.5.1 Checking
«
Check the following.
ATTENTION!
Danger of cutting! Proceed with caution during the work described below. Use the pre-
scribed protection equipment.
3.5.2 Direction of the saw teeth
« Check the direction of the
saw teeth. The saw
teeth need to be ori-
ented in the direction of
the illustrated arrow.
Illustration: 3-5: Running direction of saw blade
3.5.3 Check the oil level in the worm gear
« Check the oil level in the worm gear of the circular metal saw.
“Check oil level, change gear oil.“ on page 36
« Fill in gear oil, if required.
Running direction
Saw blade