9
G
E
T
T
IN
G
S
T
A
R
T
E
D
S
A
F
E
T
Y
/
S
P
E
C
IF
IC
A
T
IO
N
S
A
S
S
E
M
B
L
Y
/
IN
S
T
A
L
L
A
T
IO
N
O
P
E
R
A
T
IO
N
T
R
O
U
B
L
E
S
H
O
O
T
IN
G
M
A
IN
T
E
N
A
N
C
E
/
R
E
P
A
IR
Adjusting the table height
1. Unload the table of all extra items.
2. Lift the table support beam on one side. We recommend
asking for assistance in holding the beam, although it is
possible to do so only by oneself.
3. Extract the support pin as shown below.
4. Insert the pin into the next adjacent hole, either above or
below the original hole. Make sure to insert the pin all the
way through both the front and back of the hydraulic press
frame.
5. Then ease the support beam back onto the pin. When done
this way, only one person is required.
6. Repeat all previous steps for the opposite side.
7. Repeat until the desired height achieved.
