DESCRIPTION
The Palmgren 18” Metal/Wood Cutting Band Saw is for cutting
ferrous and non-ferrous metals and also hard and soft woods. The
band saw features a unitized frame of welded steel construction
and a solid cast iron work surface to ensure durability. Table tilts
45° and has a miter gauge and precision machined rip fence for
performing many different operations. Eighteen inch balanced cast
iron wheels with ball bearings and rubber treads accommodate
blade widths up to 1”. A convenient tensioning and tracking mech-
anism makes blade changing quick and easy.
UNPACKING
Check for shipping damage. If damage has occurred, a claim must
be filed with carrier. Check for completeness. Immediately report
missing parts to dealer.
The band saw comes assembled as one unit. Additional parts
which need to be fastened to the saw should be located and
accounted for before assembling:
A Table Assembly
B Rip Fence with Knob
C Miter Gauge Assembly
D Metal Cutting Blade, 14 TPI
E Wood Cutting Blade, 8 TPI
F V-belt
G Dust Chute
Hardware Bag (Part No. 24948.00) includes:
•
Wire Nut
•
10/12mm Open End Wrench (1)
•
12/14mm Open End Wrench (1)
•
3mm and 4mm Hex Wrench (1 each)
•
M5 x 8 Pan Head Screw (4)
IMPORTANT:
Table is coated with a protectant. To ensure proper
fit and operation, remove coating. Coating is easily removed with
mild solvents, such as mineral spirits, and a soft cloth. Avoid getting
solution on paint or any of the rubber or plastic parts. Solvents
may deteriorate these finishes. Use soap and water on paint, plastic
or rubber components. After cleaning, cover all exposed surfaces
with a light coating of oil. Paste wax is recommended for table top.
WARNING:
Never use highly volatile solvents. Non flammable
solvents are recommended to avoid possible fire hazard.
SPECIFICATIONS
Depth of throat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3
/
4
”
Maximum depth of cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12”
Table size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 x 19”
Table tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10° Left to 45° Right
Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18”
Blade length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136”
Blade range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-137”
Blade width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
/
16
to 1”
Blade speeds . . . . . . . . . . . . . . . 45, 65, 90, 110, 155, 215, and 3,000FPM
Overall dimensions (W x D x H). . . . . . . . . . . . . . . . . . . . . . . 27 x 32 x 76”
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355 lbs
Crate size (W x D x H). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 x 28 x 83"
Shipping weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417 lbs
Dust collection port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4”
SAFETY RULES
WARNING:
For your own safety, read all of the instructions and
precautions before operating tool.
CAUTION:
Always follow proper operating procedures as defined
in this manual — even if you are familiar with use of this or similar
tools. Remember that being careless for even a fraction of a second
can result in severe personal injury.
PROPOSITION 65 WARNING:
Some dust created by power
sanding, sawing, grinding, drilling and other construction activities
contains chemicals known to the state of California to cause can-
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks and cement and other
masonry products.
•
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area and work with approved safety
equipment. Always wear
OSHA/NIOSH
approved, properly fitting
face mask or respirator when using such tools.
Before any work is done, carefully read the cautions listed. Working
safely prevents accidents.
BE PREPARED FOR JOB
•
Wear proper apparel. Do not wear loose clothing, gloves, neck-
ties, rings, bracelets or other jewelry which may get caught in
moving parts of machine.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses which comply with United States ANSI
Z87.1. Everyday glasses have only impact resistant lenses. They
are NOT safety glasses.
•
Wear face mask or dust mask if cutting operation is dusty.
•
Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE WORK AREA FOR JOB
•
Keep work area clean. Cluttered work areas invite accidents.
•
Do not use power tools in dangerous environments. Do not use
power tools in damp or wet locations. Do not expose power
tools to rain.
2
Palmgren Operating Manual & Parts List
83118
Figure 1 - Unpacking
F
G
E
D
B
C
A
