Palmer FAT50, Руководство пользователя

Страница: 5 / 48

5
ENGLISH
DEUTSCH
IMPoRTANT
SaFeTY
INSTRuCTIoNS:
- objects have fallen into the product,
- the product has been exposed to rain or moisture,
- the product has been dropped or the cabinet has been damaged,
- the product does not operate normally.
• Exposure to extremely high noise levels may cause permanent hearing loss.
• Individuals vary considerably in susceptibility to noise induced hearing loss, but nearly everyone will lose some
hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government´s
Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:
DuraTioN Per DaY iN HourS SouND LeveL Dba, SLow reSPoNSe
8 90
6 92
4 95
3 97
2 100
1½ 102
1 105
½ 110
¼ or less 115
• According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
• Ear plug protectors in the ear canals or over the ears must be worn when operating this amplification system
in order to prevent a permanent hearing loss if exposure is in excess of the limits as set forth above. To ensure
against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed
to equipment capable of producing high sound pressure levels such as this amplification system be protected by
hearing protectors while this unit is in operation.
• Fuses: Replace with IEC type 127 (5 x 20 mm) and specified rating for best performance only. Do not use
repaired fuses or short-circuit the fuse holder.
WARNING: TO REDUCE THE RISK OF FIRE AND SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO MOISTURE OR
RAIN.
DO NOT OPEN CASE; NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: Do not touch surfaces with the “HOT“ sign, rear panels and covers with air vents, heatsinks and their
covers, as well as tubes and their covers which are designed to dissipate heat and may cause burns.
warNiNGS
The lightning flash with arrowhead symbol, is intended to alert the user to the presence of un-insulated „dange -
rous voltage“ within the product‘s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.