Touch Free
Bulk Foam Sensor Soap Dispenser
WHITE #9772 / BLACK #9773
Opening the Dispenser
To open the dispenser cover, insert key into slots
at the top of the dispenser (see figure 1). Dispenser
will automatically shut off when cover is opened.
Battery Care Instructions
Open unit (see figure 1).
Open battery cover located on the interior of the
unit on the right side (see figure 2).
Install batteries in proper direction.
(4-C-cell Alkaline Batteries required)
Replace battery cover by inserting notches at an
angle and snapping into place.
Close cover. Dispenser will not operate unless internal
lock snaps closed (see figure 3).
The Indicator Light should slowly flash green (see figure 4).
Check dispenser operation by moving your hands under it. If
it does not work, make sure the cover is closed and the
batteries are properly oriented.
Be sure to dispose of used batteries properly.
Battery Indicator Light
Slow flashing green - standby mode, indicates dispenser
is working properly (see figure 4).
Rapid flashing green - dispenser is delivering soap.
Slow flashing red - batteries require replacement. Without
replacement, the dispenser will eventually stop operating.
CAUTION:
It is the responsibility of the installer to completely read and understand all
instructions and caution statements before proceeding with installation. Following
these instructions will ensure proper function and safety.
Spartan Chemical Company, Inc.
1110 Spartan Drive, Maumee, Ohio 43537
1-800-537-8990 /www.spartanchemical.com
Figure 1
Figure 2
Figure 3
Figure 4
dispenser body
refillable bottle and
foamer valve
#9776
1000 ml
4 screws and 4 anchors
key
White #9774
Black #9775
alcohol wipe
Key
© SCC 11/08
You will need a drill and a screw driver if you are attaching with screws.
Package Includes
Dispenser, refillable bottle and foamer valve, double-sided tape
(attached to dispenser), 4 (four) screws and anchors, alcohol wipe
and key. (batteries not included). Replacement parts are available as labeled.
SF2150
