Palmer Fixture HD0950-09 Скачать руководство пользователя страница 5

Installation

1. Make sure power supply breaker is switched off. Installation must be carried out in accordance 
    with the current edition of the local wiring regulations code having jurisdiction. Installation should 
    be performed only by a qualified electrician.
2. Place template against wall at desired height (see mounting height recommendations) and mark 
    locations of 4 mounting holes and wire service entry at knockout (KO) location.
    

Note: 

For two or more dryers,  dryers should be no closer than 24 inches (610 mm) on center.  

3. Remove upper and lower retaining screws with the Allen wrenches provided.
4. Connect supply wires to terminal block where indicated and connect ground wire to base plate 
    with ground screw 
    Connections :
          

A. Connect the live wire (colored red or brown or white) to the terminal block where marked " 

".

          

B. Connect the neutral wire (colored black or blue) to the terminal block where marked " 

".

          C. 

Connect the earth wire (colored green and yellow or green), note bare earth wires should be

Note that colors of live and neutral wires depend on voltage of supply service.

5. Replace cover. Do not over-tighten screws. 

 

 

Operation

No-touch operation.
Shake excess water from hands.
Place hands under the outlet to start operation.
Rub hands lightly and rapidly.
Stops automatically after hands are removed.

Periodic cleaning of the unit is recommended to ensure optimum performance.

Cleaning and Maintenance

Disconnect the electrical supply.
Remove upper and lower retaining screws with the Allen wrenches provided.
Remove the cover.
Clean all dust lint from the interior of the dryer.
Wipe the cover with a damp cloth and mild 
cleaning solution. Do not Soak. Never use 
abrasives to clean the cover.
Replace the cover. Do not over tighten the screws.

Recommended mounting heights

- from bottom edge of dryer above finished floor (AFF)

Men
Woman
Children 4-7 years
Children 8-10 years
Children 11-13 years
Children 14-16 years
Handicapped

50"
47"
35"
39"
43"
47"
40"

(1270 mm)

(1194 mm)

(889 mm)
(991 mm)

(1092 mm)

(1194 mm)

(1016 mm)

3

Operating Instructions and Parts Manual 

Hand Dryer

Surface-mounted high speed hand dryer 

sleeved with green and yellow or green sleeving to the ground washer where marked with

the earth symbol "     ". 

BERLS.COM

(704) 937-2673

129 Oakpark Drive, Unit A, Mooresville, NC 28115

COMMERCIAL

SUPPLY

Содержание HD0950-09









Отзывы: