Palm PalmOne Zire 71, Руководство пользователя

Страница: 6 / 22

SMS
2
To install SMS (Mac computer):
1.
Insert the Software Essentials CD-ROM into your computer’s CD-ROM drive.
2.
Double-click the Software Essentials CD, open the Communications folder and
then open the Telephony folder.
3.
Select all files except the handbooks, and then double-click.
NOTE
This step includes the Phone Link application, as well as the SMS
application.
4.
In the User drop-down list, verify that the user name corresponds to your
handheld.
NOTE
If the user name is not correct, reselect the files you selected in step 3
and then click Remove from List. Select the correct name and then begin again
from step 3.
5.
Connect your handheld to the cradle/cable and press the HotSync button .
Configuring Phone Preferences
You need to configure the Phone Preferences for your handheld before using SMS.
You can do this by running the Phone Link application, which was automatically
included when you installed SMS. For more information, see the Phone Link
documentation on the Software Essentials CD-ROM.
NOTE
If you need updated phone drivers and settings, these can be obtained from
the Phone Link Updater, which may be included on your Software Essentials
CD-ROM. For more information, see the Phone Link Updater documentation on the
Software Essentials CD-ROM.
Making the connection
After you install the software on your computer from the Software Essentials CD,
configure the Phone Preferences, and perform a HotSync operation, you are ready
to start using SMS.
This section shows you how to connect your handheld and your mobile phone.
This is not a procedure that you perform by itself. You do this only when you are
ready to send or receive SMS messages as described in
“Making the connection”
later in this handbook.