020-17469-00 Instructions For Use Jet Mixer RevD
www.pall.com/biopharm
14
Figure 18: Moving from open to closed (stops fluid flow)
OPTIONAL: Prior to filling with liquid, an inert gas or air may be introduced through one of
the top ports to pre-inflate the mixing biocontainer. Pre-inflation for a contained or sterile
application should be done only via a sterilizing-grade vent filter integral to the mixing
biocontainer.
OPTIONAL: Any sensors (pH, conductivity probe etc.) should be installed before filling the
mixing biocontainer. A temperature pt-100 probe can be installed after since it is not fluid
contact.
5.2 Filling the mixing biocontainer
Make sure that the clamp on the drain tubing is closed and that the clamps on the filling
tubing are open. Connect the filling tube to the liquid supply and start filling.
