ENGLISH
It is recommended to connect the control panel to the home Wi-Fi network (through the smartphone
app), in order that the control panel works in Station Mode (Sta Mode).
Attention: in case of change of the router password, you will need to reset the control panel according
to the following procedure:
- Open the Info menu - screen 2 (as per the figure below)
connbox00xx
xxx.xxx.xx.x
signal xxdBm
proto DHCP
- Press the key of the control panel and hold it for 4 seconds until you hear a “beep”.
The control panel will then start the restart process moving back to access-point mode.
You will now be able to log back in to the router using the App (refer to the manual attached).
33
004778160 - 18/08/2020