MR05660
10
INSTALLATION & SET-UP
Hydraulic Connection
READ AND UNDERSTAND ALL SAFETY STATEMENTS
Read all safety decals and safety statements in all manuals before beginning any
Cold
Planer hydraulic connection. Know and obey all OSHA regulations, local laws, and
other professional guidelines for your operation. Know and follow good work practices
when assembling, maintaining, repairing, mounting, removing, or operating this
equipment.
1.
Disconnect the hydraulic hose quick couplers (or purchase locally, if not supplied) from one
another and attach the quick couplers to your prime mover as per the instructions in your prime
mover's operator's manual.
2.
Carefully raise the loader and cycle the tilt cylinders to check hose clearances and to check for
any interference.
3.
Cycle the hydraulic cylinder(s) on this product several times from fully retracted to fully extended
until all air has been completely removed from the cylinder(s).
NOTICE: When shipped, the hydraulic cylinder on the product contained air or an air-fluid
mixture. Failure to remove all the air from the hydraulic cylinder can cause uneven, jerky
cylinder movement when the hydraulic controls are being operated and unwanted cylinder
movement when those controls are not being operated.
WARNING!
Do not lock the auxiliary hydraulics of your prime mover in the "ON" position.
Failure to obey this warning could result in death or serious injury.
