PALAB DAC-M1, Руководство пользователя

Страница: 15 / 26

7-1. Sample rate conversion
Use to activate the up or down conversion circuit when receiving PCM or DSD signals.
SRC : OFF ( default )
The original input signal is sent directly to the D/A converter without conversion.
SRC : PCM xxK or SRC : DSD xx
The input source is converted to PCM or DSD digital format, and then sent to the D/A converter.
7-2. PCM digital filter
The Digital Filter function primarily changes characteristics outside the audible frequency, They cannot affect
changes within the audible frequency, You can choose the following digital filter.
DF : LIN FAST ( Linear phase fast roll-off filter ) ( default)
DF : MIN FAST ( Minimum phase fast roll-off filter )
DF : MIN SLOW ( Minimum phase slow roll-off filter )
DF : APODIZING ( Apodizing fast roll-off filter )
DF : CORRECTED ( Corrected minimum phase fast roll-off filter )
DF : BRICK WALL ( Brick wall filter )
DF : LIN SLOW ( Linear phase slow roll-off filter )
7-3. Analog output
You can choose to have the left and right channel outputs swapped or work in single channel mode.
OUTPUT : L - R ( default )
OUTPUT : R - L
OUTPUT : L - L
OUTPUT : R - R
14