1
481 Panet Road Winnipeg, MB R2C 2Z1
15 AND 25 GALLON SPRAYERS
INSTRUCTION MANUAL
G
ENERAL
I
NFORMATION
The purpose of this manual is to assist you in operating and maintaining your lawn and garden
sprayer. Please read it carefully as it furnishes information which will help you achieve years of
dependable trouble free operation.
W
ARRANTY
-P
ARTS
-S
ERVICE
To obtain prompt, efficient service, always remember to give the item number and your model
number. Whenever you need parts or repair service, contact Princess Auto Ltd. at:
Telephone #
1-800-665-8685
Fax #
1-800-265-4212
The sprayer is shipped in a carton and requires assembly before it can be used.
Refer to parts list and drawing, and then follow this procedure when assembling:
IA)
ASSEMBLY INSTRUCTION FOR 25 GAL. PULL TYPE, ITEM # 8002029 (
P
. 17-19)
1)
Install tow frame (19) on frame (17) using bolts (18) and lock nuts (13).
2)
Install boom frame (10) on frame (17) using bolts (9) and lock nuts (13).
3)
Install lid and outlet plug on tank (69) with tether straps.
4)
Install tank (69) on frame (17) using bolts, lock washers, and plain washers (14), (15), (16).
5)
Slide wheels (12) on to axle followed by washer (11) and install cotter pin (71).
6)
Insert boom slide frame (55) into bottom boom frame (10) and lock in position using pin (67)
and thumb screw (66).
7)
Install boom arm left inside (1), right inside (50) on frame boom slide (55) using carriage
bolt, plain washer, lock washer, and wing nut (54), (4), (56), (57).
8)
Install boom arm left outside (5), right outside (43) on inside boom arms (1),(50) using bolt,
plain washer, lock washer, and nut (2), (4), (56), (3).
9)
See page 16 for pump assembly diagram. Use Teflon tape on all pipe thread fittings
10)
Mount pump (27) and switch holder (28) to tank using screws (34).
NOTE: There is an extra 6 feet of red wire so that the switch can be mounted
near the operator. If mounted on the tank, wrap the extra 6 feet of wire.
9110602
R
EV
. 05 N
OV
. 03
2
