WX-1-O
User Guide Version 1.0
The WX-1x can be configured in several modes: Access Point, WDS Root Access Point, WDS Repeater or
WDS Bridge. When shipped from the factory, the WX-1x is set to Access Point mode. The default IP
address of the WX-1x is
192.168.1.250
and username/password of
pakedge
/
pakedgea.
In order to log into the WX-1x, you must first configure the TCP/IP settings of your PC/Notebook. Follow
these steps:
1.
Under
Control Panel
, double-click
Network Connections
and double-click the connection
of your Network Interface Card (NIC). The Local Area Connection Properties dialog appears:
2.
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
. The Internet Protocol (TCP/IP)
dialog appears where you can configure the TCP/IP settings of your PC.
