WA-2200 Series User Guide
13
Reset to factory default settings
While setting up or troubleshooting, you may need to reboot the AP or restore it to its
factory default settings.
Caution: Do
not
power off the AP during a factory reset.
Reset using the interface
To only restart the AP, maintaining all settings:
1.
In the Overview or Connections tab, click Software Reset. The AP restarts.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP.
1.
Go to the Advanced tab and click Device Settings.
2.
Click Factory Default, then click Yes.
Reset using the physical RESET button
Your AP has a recessed RESET button accessible through a pinhole next to the Ethernet port
underneath the AP.
To only reboot the AP, maintaining all settings:
1.
While power is connected, insert a narrow, pointed object (such as a straightened
paper clip) into the hole.
2.
Press and release the button.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP.
1.
While power is connected, insert a narrow, pointed object (such as a straightened
paper clip) into the hole.
2.
Press and hold the button for at least ten seconds, then release it.
