Pakedge SX-24P, Быстрый старт, Страница: 6 / 12

6
1. There are two ways to reach the IP Address settings on the switch. From the Dashboard at
the center of the screen or the menu at the top of the page, click “ System ” and then go to
“ System Settings > Basic Settings” .
2. In this section you can enter the switch IP address in the box next to “ IP Address ”. By
default the switch IP is 192.168.1.205. You will also need to enter the “ Subnet Mask ” and
“ Gateway ” settings for your network. By default on a Pakedge network subnet mask is
255.255.255.0 and the Gateway will be 192.168.1.99.
3. Click on “ Apply ” at the bottom of the page and the switch will be updated with the new IP
settings. If the IP address you have changed the switch to is in the same IP subnet range
you will be redirected automatically. Otherwise you will need to update your computers IP
settings to match the new IP of the switch in order to access it again.
Changing the IP Address of the Switch