4
Installing the SK-24 is similar to installing any other Pakedge switch. If you have installed a man-
aged switch before, the process will be very similar. The GUI for the SK-24 and SK-24F switches will
be the same so the configuration steps discussed later in this quick start guide can be used on any
of the switches.
Tools required:
•
Philips Screwdriver (if using rack-mount brackets).
•
Computer with Ethernet interface and a modern web browser.
•
Optional: An integrated “DB-9” port or USB-To-DB9 adapter may be necessary in order to
use the console interface.
•
Ethernet Cable.
Preparing to Install the Switch
Installation
1. Remove the switch from the box.
2. Optional: If mounting the switch in a standard 19” AV rack, attach the rack-mounting
brackets that come with the switch to the sides. If not rack-mounting, ensure that the
switch is physically mounted near power and network connections (i.e, backbone switch or
firewall/router).
3. Connect power to the device.
4. Connect an Ethernet cable from your computer to any LAN port on the switch.
5.
You are now ready to configure the switch with an IP address in your network range.